Skip to main content Skip to search Skip to main navigation
More Variants
AWT Swim-Innovation 380 , white,380x220, grey
Let our SPA's inspire you. Relax in a pleasant atmosphere and strengthen your immune system and circulation. From the moment you step into the warm, pleasant water of our AWT outdoor whirlpools, you will forget about everyday life. Back pain is alleviated and stress is a thing of the past. Your well-being will be significantly improved.
Rectangular white whirlpool from above, with seats and fittings at one end.
Product description

  • Exclusive design whirlpool for 4 persons
  • A total of 24 design jets
  • 4 pumps (2 hydro pumps with 2.000W each, 1.800W and one circulation pump)
  • Counter current system with 2 extra illuminated extra large RiverJets for swimming
  • Two underwater colored light lamps and 16 LED's for surface lighting
  • 4 illuminated controllers for air mixing
  • Gecko computer system with color display, intuitive controls. With 5 predefined operating modes, operation is child's play. Of course, individual schedules can also be created.
  • Heating with temperature selection (3kW)
  • Ready for Heatpump. A heat pump can be connected to this pool either immediately or later.
  • Water level sensor to protect the pumps
  • Effective programmable filter system with a water flow rate of 6sqm
  • Combination of UV disinfection and ozone. The UV water treatment, unique in this price range, which is also used to obtain drinking water, kills viruses and bacteria. In combination with ozone disinfection a very effective system.
  • Durable and very solid aluminum construction
  • Closed, insulated base plate made of GFK
  • incl. alu-laminated side panel (40mm)
  • High quality acrylic from Aristech (USA) with antibacterial surface
  • 2 removable headrests
  • Armrests for relaxed lying in the pool
  • Delivery completely ready for connection incl. apron. The apron can also be removed in half, so that the pool can also be half embedded in the ground.
  • Water capacity 5500 liters Weight 755 kg, electrical fuse: 3x25A
  • 3880mm x 2200mm x 1250mm (length x width x height)24 months Germany-wide on-site service (except for the exchange of wearing parts such as lamps) by our own customer service. Of course we offer you a spare parts service also after the warranty period
  • An insulated cover (995,00 EUR), as well as a staircase with handrail (795,00 EUR) are available for an extra charge. Both can be found in our store under the category accessories and care listed with.

Control panel K1000 from Gecko with color display and touch panel. One picture in basic mode, the second shows the water care menu
State-of-the-art control electronics

All SwimSpa's in the Innovation series are equipped as standard with an easy-to-operate color display with intuitive user controls. The high-resolution display provides the spa user with ultimate ease of use. All functions are self-explanatory and the pre-set programs (Not at home, Beginner, Energy saving, Super energy saving mode and Weekend) make operation very easy. Of course, all programs can be adapted to individual usage patterns. Optional additional functions such as streaming music can also be conveniently controlled via the control panel.

The high-end controller manufactured by the Canadian company Gecko is durable and very robust. It is operated via 3-phase (380V) to distribute the total load over 3 fuses.

24 months on-site service

We are so confident in our products that we offer a 24-month on-site service throughout Germany.

Outdoor unit of the Gecko in.temp heat pump with fan in white-grey housing
Ready for Heatpump

Our Innovation swimming pools are already equipped with a heat pump connection at the factory. This can either be installed directly with the pool or easily retrofitted at a later date.

Gecko in.temp heat pump (optional)

The optional Gecko in.temp heat pump offers intelligent energy management and is controlled directly via the pool's control panel. Even cooling is possible. By using free renewable energy from the air, it is more than 4 to 5 times more efficient than conventional heating systems and saves up to 75% energy.

Water circuit in the whirlpool, from the filter, via the pump, to the heater and then back into the pool via the optional UV disinfection system
Crystal clear water thanks to UV disinfection

Our specially developed UV disinfection system uses ultraviolet light to purify the water and kill viruses and bacteria. Thousands of liters of freshly filtered water, free of small particles and bacteria, are produced every day.

A fine particle filter constantly filters out small and large particles. The circulation pump has been specially designed for long-term operation with low power consumption. A special feature is that the running time is programmable and can therefore be individually adapted to personal requirements. All AWT models in the Innovation series are also available with a salt water disinfection system for an additional charge.


Illustration of the control electronics with integrated heating in a robust, blue housing
Illustration of the Gecko in.touch module for remote control of the pool, as well as view on cell phone and tablet

Shows a selection of: 6 different acrylic colors, 2 wood colors and 2 colors for the cover
Special equipment
You can choose between 7 acrylic colors and an apron and cover in brown or grey. The corners of the apron can be supplied in acrylic (Premium Edition) or wood look (Classic Edition) as required. The following options are also available at an extra charge:

Heat pump in.temp 5kW
Energy savings of up to 75% and controlled directly via the whirlpool control panel.
Surcharge: 1,990 EUR

Salt water disinfection system
Environmentally friendly with salt water. Never chlorinate again.
Surcharge:1.999 EUR

Web package
Control your pool via cell phone
Surcharge: 299 EUR

to the main page Swim Spa

A power connection is required for installation. Please note that installation may only be carried out by the respective network operator or by an installation company listed in the network operator's installer directory.
Information on the manufacturer and, if applicable, the responsible person and, if applicable, warnings and safety information

Manufacturer: EAGO Deutschland GmbH, Auf dem großen Damm 13-19, 47546 Kalkar, www.eago.de
Warnings and safety information: Sicherheitsdatenblatt als pdf